Project Description

Rate this item
(0 votes)

VMO MASK V2 BASIC FILTER

download

site

Project Details

  • stampa: VMO MASK V2 BASIC FILTER - Coronavirus COVID-19: Filtro Básico D: 8 cm para VMO MASK V2 (Basic Filter D:8cm for VMO MASK V2) https://cults3d.com/en/3d-model/various/vmo-mask-v3-coronavirus-covid-19-improved- version Para utilizar en situaciones de poco riesgo (For use in low risk situations). El porta filtro es removible y tiene anclaje tipo 3M serie 6000 (The filter holder is removable and fit some 3M filters 6000 series) Layer Height: 0.20 to 0.32mm Nozzel: 0.4mm or 0.8mm (Recommended) SIN SOPORTES (No supports needed) PLA, PETG or ABS Se necesita (Need) FELPA (Felt) D: 80mm x2 Mascara quirúrgica (Surgical mask): D:80mm Papel de Cocina (Kitchen Paper) IMPRIMIR (Print): Recomiendo hacer el Test de Expansión Horizontal, para verificar si la impresora esta correctamente calibrada, antes de imprimir las piezas. (I recommend doing the Horizontal Expansion Test, to verify if the printer is correctly calibrated, before printing the parts). HorizontalExp.stl FILTER CAP CIR80-12.stl FILTER CIR80.stl 3D PRINTING SETTINGS Layer Height: 0.20 to 0.32mm Nozzel: 0.4mm or 0.8mm (Recommended) SIN SOPORTES (No supports needed) PLA, PETG or ABS
Read 1704 times